- ENGINEERED COMPOSITE SOLUTIONS
Materials that do more.
Samasti brings together composite products for fluid handling, process equipment, industrial structures and specialised components—shaped around what the application needs.
FRP / GRP Chemical Storage Tanks
*
FRP / GRP Pipes & Fittings
*
FRP Process Equipment
*
FRP Blowers
*
FRP Moulded Gratings
*
FRP Pultruded Gratings
*
FRP / GRP Chemical Storage Tanks
*
FRP / GRP Pipes & Fittings
*
FRP Process Equipment
*
FRP Blowers
*
FRP Moulded Gratings
*
FRP Pultruded Gratings
- ABOUT SAMASTI
Not your average material supplier.
THE RIGHT MATERIAL.
The right possibility.
Samasti Composites brings together FRP and GRP systems for industrial equipment, infrastructure and application-specific components. Based in Rajkot, our focus is on matching the product, material system and form to the conditions it will face.
A piping network, a process vessel, a structural profile or a moulded part: each starts with a different requirement. We look at the medium, loads, environment and installation needs together, so the solution is shaped around the application from the beginning.
- AT A GLANCE
A glimpse into where we are
Years of material experience, an expanding product range and a growing industrial footprint shape how Samasti supports customers today.
Customers
0
+
Kilometer Piping
0
+
Product Categories
0
+
Global
Reach
- PRODUCT RANGE
There is a
solution for that.
From moving fluids to supporting structures, our range brings composite systems into the places where material choice makes a difference.
Composite pipes and fittings for water networks, process lines and industrial fluid handling. The resin system, joint and pipe configuration are selected around the service conditions.
- Pipes
- Fittings
- Headers
- Pipe spools
FRP Process Equipment
Composite equipment for storing, handling and treating process media. Vessel geometry and material selection start with the contents, operating conditions and installation requirements.
- Tanks
- Vessels
- Scrubbers
- Ducting
Pultruded Profiles & Structures
Continuous composite sections for industrial supports and access systems. Profiles bring structural form and material properties together across assemblies exposed to demanding environments.
- Structural profiles
- Gratings
- Handrails
- Cable supports
SMC Moulded Products
Sheet moulding compound is formed into defined shapes for electrical, utility and infrastructure applications, bringing repeatable geometry to enclosures, panels and functional components.
- Enclosures
- Meter boxes
- Panel tanks
- Covers
Thermoplastic Components
Moulded polymer parts for electrical assemblies, piping and industrial equipment. The polymer and component geometry are considered together for the intended duty.
- Enclosures
- Fittings
- End caps
- Cable accessories
GFRP Lighting Poles
Composite pole systems for outdoor lighting and infrastructure. Pole form, mounting arrangement and accessories are considered around the site and lighting requirement.
- Conical poles
- Cylindrical poles
- Brackets
- Base accessories
Wind Energy Components
Composite forms for wind equipment, from moulded covers to structural sections and platform components. Geometry and material requirements depend on where the part sits in the assembly.
- Nacelle covers
- Spinners
- Pultruded sections
- Access components
General Moulded Products
FRP sheets, covers and shaped components for buildings and industrial installations. Moulded forms support requirements that call for more than a standard profile.
- Cladding
- Canopies
- Cooling tower parts
- Machine covers
Mobility Components
Moulded composite parts for vehicle interiors and exteriors, developed around component shape, assembly interfaces and the relevant application specifications.
- Interior panels
- Cab masks
- Ceiling panels
- Enclosures
GRP & GRE Piping Systems
Composite pipes and fittings for water networks, process lines and industrial fluid handling. The resin system, joint and pipe configuration are selected around the service conditions.
- Pipes
- Fittings
- Headers
- Pipe spools
FRP Process Equipment
Composite equipment for storing, handling and treating process media. Vessel geometry and material selection start with the contents, operating conditions and installation requirements.
- Tanks
- Vessels
- Scrubbers
- Ducting
Pultruded Profiles & Structures
Continuous composite sections for industrial supports and access systems. Profiles bring structural form and material properties together across assemblies exposed to demanding environments.
- Structural profiles
- Gratings
- Handrails
- Cable supports
GFRP Lighting Poles
Composite pole systems for outdoor lighting and infrastructure. Pole form, mounting arrangement and accessories are considered around the site and lighting requirement.
- Conical poles
- Cylindrical poles
- Brackets
- Base accessories
SMC Moulded Products
Sheet moulding compound is formed into defined shapes for electrical, utility and infrastructure applications, bringing repeatable geometry to enclosures, panels and functional components.
- Enclosures
- Meter boxes
- Panel tanks
- Covers
Thermoplastic Components
Moulded polymer parts for electrical assemblies, piping and industrial equipment. The polymer and component geometry are considered together for the intended duty.
- Enclosures
- Fittings
- End caps
- Cable accessories
Wind Energy Components
Composite forms for wind equipment, from moulded covers to structural sections and platform components. Geometry and material requirements depend on where the part sits in the assembly.
- Nacelle covers
- Spinners
- Pultruded sections
- Access components
General Moulded Products
FRP sheets, covers and shaped components for buildings and industrial installations. Moulded forms support requirements that call for more than a standard profile.
- Cladding
- Canopies
- Cooling tower parts
- Machine covers
Mobility Components
Moulded composite parts for vehicle interiors and exteriors, developed around component shape, assembly interfaces and the relevant application specifications.
- Interior panels
- Cab masks
- Ceiling panels
- Enclosures
- MATERIAL PERFORMANCE
The new definition of material performance.
The answer changes with the application. Start with what the component faces, then choose the material system around it.
Corrosion Resistance
Match the resin and reinforcement to the fluids, chemicals and environment the component will encounter.
Strength & Weight
Consider the required loads alongside handling and assembly needs, rather than treating weight and strength separately.
Electrical Behaviour
Choose the material around the required insulation or conductivity characteristics of the final assembly.
Environmental Exposure
Account for moisture, outdoor conditions and changing temperatures when defining the product specification.
Freedom of Form
Use pipes, profiles, moulded shapes and fabricated assemblies to suit the geometry of the application.
Service Requirements
Bring operating conditions, installation interfaces and inspection needs into the specification from the start.
- INDUSTRIES
Where these
materials go.
Composites become part of piping networks, process plants, access systems and equipment. The industry sets the context. The application sets the detail.
Chemical & Process Industries
Piping, tanks, scrubbers and ducting for applications where the process medium and exposure conditions drive material selection.
Water & Wastewater
Composite piping, storage and treatment components for water supply, effluent handling and environmental infrastructure.
Power & Energy
Composite products for cooling systems, electrical assemblies and equipment used across conventional and renewable energy applications.
Industrial Infrastructure
Profiles, gratings, handrails, covers and lighting components for industrial access and supporting infrastructure.
Electrical & Electronics
SMC and thermoplastic enclosures, supports and components specified around the needs of electrical assemblies.
Rail & Mobility
Moulded interior and exterior parts for vehicle systems where geometry, interfaces and application specifications matter together.
Buildings & Utilities
Composite cladding, covers, pole systems and utility components for construction and site requirements.
- PROJECT APPLICATIONS
Built around
the bigger picture.
A project is more than a single product. Explore representative applications where piping, equipment and composite structures come together.
01 / WATER INFRASTRUCTURE
A better route for water.
Pipe networks planned around the flow, service conditions and installation interfaces.
Products
- GRP pipes
- Fittings
- Headers
PROJECT INPUTS
- Fluid
- Pressure
- Route
- Connections
02 / PROCESS INDUSTRY
Made for what flows through.
Equipment and piping considered together for chemical handling and treatment duties.
Products
- Tanks
- Scrubbers
- Process lines
03 / INDUSTRIAL UTILITIES
Support for the everyday load.
Composite components for cooling systems, access arrangements and supporting site infrastructure.
Products
- Profiles
- Gratings
- Cooling tower parts
- FROM REQUIREMENT TO SOLUTION
Start with the duty.
Build from there.
The useful details are often the ones that happen around the product. A clear brief connects the application to the final specification.
01
Understand the application.
Define the medium, environment, loads and operating conditions.
02
Choose the material system.
Compare the resin, reinforcement or polymer against the required duty.
03
Define the product.
Align the form, dimensions, connections and installation interfaces.
04
Set the specification.
Bring drawings, testing requirements and relevant standards into the brief.
- BUILT TO REQUIREMENT
When standard
won’t do.
Some applications need a different size, an unusual geometry or a complete assembly. Share the drawing, service conditions and installation details so the product form and material options can be considered together.
Custom Dimensions
Dimensions and interfaces defined around the installation, component or assembly.
Application-Specific Forms
Profiles, moulded parts and fabricated shapes considered around the duty they need to perform.
Material Selection Support
Resin, reinforcement and polymer options compared against the stated service requirements.
Assembly Requirements
Connections, mounting points and adjoining equipment considered before the final specification.
- WHY SAMASTI
What sets us apart.
A useful composite solution starts with understanding the duty, then connecting material choice, product form and the final application.
01
Application Comes First
The medium, loads, environment and installation are part of the conversation from the beginning.
02
A Connected Product Range
Piping, equipment, profiles and moulded forms can be considered within the same project discussion.
03
Material Knowledge
The product name is only the starting point. Resin, reinforcement and service conditions shape the selection.
04
Room for Custom Requirements
Non-standard dimensions and component interfaces are considered around the application.
05
Clear Technical Inputs
Drawings and defined specifications help align the product with the requirement.
06
Support Beyond Selection
Installation needs and repeat requirements stay connected to the original specification.
- CERTIFICATIONS
Standards we work to.
Quality systems matter most when they become part of everyday manufacturing and supply.
Certification details
Certification logos and documents will be added here.
- CLIENT
The choice behind leading names.
Samasti supports industrial customers across electrical, engineering and manufacturing applications.
Our industrial customers
Client logos will be added here.
- TRUST
What our customers say.
- START A PROJECT
Bring us the
requirement.
A drawing, a service condition or an application problem is enough to start. Share what the product needs to do, and we can help frame the material, form and specification around it.
Their material quality and technical response helped us select the right product for a demanding industrial application.
Rajesh Patel Purchase Manager